Pioneer DEH-P360 - Manual (Page 37)

Introduction of XMoperation
1 2
You can use this unit to control a XM satellite di-
gital tuner (GEX-P910XM), which is sold
separately.
For details concerning operation, refer to the
XMtuners operation manuals. This section
provides information on XMoperations with
this unit which differs from that described in
the XMtuners operation manual.
1 XM tuner information
Shows the XMtuner information which has
been selected.
2 XM channel number indicator
Shows to which XMchannel number the
tuner is tuned.
! If a channel number 100 to 199 is se-
lected, d will light up above the last two
digits of the XMchannel number.
! If a channel number 200 or more is se-
lected, d will blink above the last two di-
gits of the XMchannel number.
XMoperation
XMoperation of the following function with
this unit differs.
! Swiching the XM channel select setting
(Refer to this page.)
Swiching the XMchannel select
setting
You can switch if you select a channel with a
channel number or from a channel category
when you select a channel.
1 Press CLOCK and hold to switch the
channel select setting.
2 Press CLOCK to select the desired chan-
nel select setting.
Press CLOCK repeatedly to switch between
the following channel select settings:
CHNUMBER (channel number select setting)
CATEGORY (channel category select
setting)
Other Functions
En
37
English
Section
09