Panasonic KV-S2045CU - Manual (Page 24)

Cleaning the Unit
24
3
Use the roller cleaning paper
(KV-SS03) to remove the dirt from the
surfaces of the retard roller, paper feed
roller, separation roller, 6 drive rollers,
6 free rollers. Also, remove dust on the
paper sensors and reflector sheets
with a cotton swab.
≥ When wiping off the dirt on the roller sur-
faces, hold the rollers to prevent them
from rotating, and wipe the rollers all the
way around them proceeding from one
end to the other in the directions of the
arrows shown in the figure on the right.
4
Clean the reflector sheet for the ending
sensor.
≥ Remove dust on the reflector sheet of the
ending sensor with a cotton swab.
≥ The reflector sheet is behind the shaft.
Drive rollers
Free rollers
Free rollers
Paper feed roller
Separation roller Waiting sensor
Starting position sensor
Drive rollers
Reflector sheets Retard roller
Paper detector
Cotton swab
Reflector sheet
for ending sensor