Planar A480-PL User Manual
Page 11
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc.
Page 11
Viper (PD7170) installation instructions
CONNECTING THE AKPro ATTACHMENT PLATE AND
CEILING MOUNT
(Planar/Premier PDS mount P/N 997-5351-00 and Phillips screwdrivers required)
1. Position the projector bottom-up on a soft surface. Consult the Attachment Plate
Diagram for plate orientation, mounting hole locations and required screws and spacers
for the Viper. Align the bottom part of the Planar/Premier PDS mount with the
attachment plate holes and insert and tighten each M4x30 screw through an appropriate
silver washer and lock washer, the designated holes in the Attachment Plate, then
through
the 5/8” nylon spacers and finally into the projector ceiling mount holes.