Pioneer XM2GO - Manual (Page 25)

Using inno with a PC 48
Using inno with a PC
Using inno with a PC 49
Using inno with a PC
Click here to begin the
installation.
Click here when you’re
finished with the
installation procedure.
Follow the directions indicated on the screen. If you have any questions about the
XM+Napster software, see the XM+Napster FAQs at http://napster.xmradio.com.
System Requirements
The inno will not work with all computers.
The PC system must meet the following requirements:
■ Intel ® Pentium ® - class CPU
■ Microsoft Windows XP Home, Windows XP Professional, or Windows 2000 operating system*
■ At least 64 MB of RAM.
■ At least 13 MB of available hard disk space for XM+Napster application.
■ Internet Explorer 5.1 or higher.
■ Windows Media Player 9 or higher; Windows Media Player 10 recommended for Windows XP.
■ Active Internet connection; we recommend a broadband (cable, DSL, or fiber) connection for
optimal performance.
■ inno may not work with all computers meeting these requirements depending on
system configuration and user demands on existing hardware and software.
*The following operating systems are not supported: Windows 95, Windows 98, Windows NT, Windows Me, and Mac OS.
Setup
We recommend reading this entire section before using your inno with a PC.
To connect your inno to your PC:
1. If you haven’t done so already, disconnect your inno and its dock from your PC.
2. Insert the XM+Napster CD into your computer’s CD or DVD drive.
3. The software should start automatically. You should see the following screen on your PC:
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 48