Panasonic AG-HPG20P - Manual (Page 106)

List of setting menus (continued)
The underlined settings are the factory mode settings.
106
OTHER FUNCTIONS screen
Item Description of settings
PC MODE SELECT This is used to select the data transfer mode.
USB HOST:
USB-connected HDD can be controlled.
USB DEVICE:
Recognizable from a PC connected via USB
BEEP SOUND This is used to set the beep sound to ON or OFF. (Page 109)
ON:
The beep sound is output
OFF:
The beep sound is not output
<Note>
The sound from the output connectors is muted when beeps are sounded.
CLOCK SETTING This is used to set the unit’s internal calendar. (Page 27)
TIME ZONE The time is set in 30-minute increments from 12:00 hours behind GMT to 13:00 hours
ahead of GMT (Note that + 12:30 cannot be set, but + 12:45 can be set.). (Refer to
the table below.)
0:00
Time
difference
(from GMT)
Region (city)
Time
difference
(from GMT)
Region (city)
00:00 Greenwich – 00:30
– 01:00 Azores – 01:30
– 02:00 Central Atlantic – 02:30
– 03:00 Buenos Aires – 03:30 Newfoundland
– 04:00
Halifax (Nova
Scotia)
– 04:30
– 05:00 New York – 05:30
– 06:00 Chicago – 06:30
– 07:00 Denver – 07:30
– 08:00 Los Angeles – 08:30
– 09:00 Alaska – 09:30 Marquesas Islands
– 10:00 Hawaii – 10:30
– 11:00 Midway Islands – 11:30
– 12:00 Kwajalein Atoll + 11:30 Norfolk Islands
+ 13:00 + 10:30 Lord Howe Island
+ 12:00 New Zealand + 09:30 Darwin Islands
+ 11:00 Solomon Islands + 08:30
+ 10:00 Guam + 07:30
+ 09:00 Tokyo + 06:30 Rangoon
+ 08:00 Beijing + 05:30 Mumbai (Bombay)
+ 07:00 Bangkok + 04:30 Kabul
+ 06:00 Dhaka + 03:30 Teheran
+ 05:00 Islamabad + 02:30
+ 04:00 Abu Dhabi + 01:30
+ 03:00 Moscow + 00:30
+ 02:00 Eastern Europe + 12:45 Chatham Islands
+ 01:00 Central Europe