Panasonic 10:1 Auto Iris Servo Control Zoom Lens AW-LZ10MD6 for AW-E300 Series - Manual

Instructions
1 0 : 1 Auto Iris Servo Control Zoom Lens
AW-LZ10MD6
for AW-E300 Series
Panasonic^
Before atlempting 1o conned or operale Ihis produci,
please read mese insiruciions comoletoly
PREFACE
Servo cono'oi zoom lens AW LZiOMDfi used wim AW-E300
serres color camera (1/3” 3CCD C-mouni remole control color
carr>era).
INSTALLATION
Rerrvove Ihe body cap from the camera by pulling it.
Attach the 10; 1 auto iris servo control zoom lens AW-
L210MD6 into the lens mount and turn the lens clockwise to
hold the lens securely.
Connect the camera cable to the iris conrveclor on the camera.
Conr>ecl the control cable to the tens l/F connector on the pan/
till unit.
Control cable
Camera cable
To ler>s l/F connector
on the pan/tilt unit
SPECIFICATION
Focal Length:
Maximum Relative
Aperture:
Image Size
Ins;
Zoom:
Focus:
Focusing Range:
Field of View ■
Horizontal
Vertical
Diagonal
Rangeback:
Mount;
Filler Size:
Dimensions:
Weight
6 - 60 mm. 10 Times
Ft 6 ( 6 - 6 0 m m )
<i6 mm (4.8 X 3.6 mm)
F 1 6 - F 1 6 . CLOSE Servo
Sen/o
Servo
1.2 m -<-»
Wide Tele
43"36' - 4^35'
33<>2A' - 3^26‘
53^08’ - 5^43’
17 526 mm ± 0.03 mm
C Mount
i}i55 mm P - 0.75 mm
68 (H) X 75 <W) X 112 (D) mm
(2-2l/32-(H) X 2-31/321W)
x4-13/32"(D))
0.6 kg (1 32 lbs)
Input Voltage ;
Current Consumptior
Ins Operating Time :
+ 12 VDC
250 mA Max
Approx. 3 s (Full Travel)
Zoom Operating Tin>e : Approx. 4 s (Full Travel)
Camera Connector: HR lOA-10P-12P. HIROSE
Control Connector: HR10A-10P-12S. HIROSE
Weight and dimensions shown are approximate.
Specifications are subject to change without notice
NOTE : Refer to the operating instructions of
AW-E300 series for details.