Panasonic AG-HPG20P - Manual (Page 22)


Basic operations
Hold down [POWER] for at least 1 second.
The power display LED lights, and the power is turned on.
When [POWER] has been held down for more than 2 seconds while the power is on, the power display
LED will go off, and the power will be turned off. •
•
Turning the power on and off
1
Hold down [POWER] for at least 1 second to turn the power on.

Raise the LCD monitor while pressing the LCD monitor open button in the direction shown by
the arrow.
AG-HPG20 AG-HPG20

Set the LCD screen to the angle where it is easiest to see its displays.
AG-HPG20 AG-HPG20
Make sure that the LCD monitor is raised upright before turning it.
EXIT/2
ALT/3
1
USER
SET
THUMBNAIL
/MODE
MENU/MODE CHK
REC
PAGE / AUDIO MON / VAR
POWER COUNTER
RESET
Using the LCD monitor
In the clockwise
direction, the screen
can be turned up to 90
degrees.
The monitor cannot
be turned more than
90 degrees. Applying
excessive force beyond
this limit may cause
damage the unit. •
Turn the LCD monitor
screen 180 degrees
counterclockwise so that
it is facing the front.
The monitor cannot
be turned more than
180 degrees. Applying
excessive force beyond
this limit may cause
damage the unit. •
10º
0º
LCD monitor screen LCD monitor screen
10º
The LCD monitor screen
will not tilt more than
120 degrees toward the
function buttons.
Applying excessive
force beyond this limit
may cause damage
the unit. •
Once the LCD monitor
screen is positioned to
face the front, it cannot
be turned any further
in the counterclockwise
direction.
Applying excessive
force beyond this limit
may cause damage
the unit. •
Function buttons