Repairing and connecting clips – Panasonic AG-HPG20P User Manual

Page 41

Advertising
background image

1

Playback

Repairing and connecting clips

Repairing defective clips

The defective clip indicator (yellow

X

) appears

in order to indicate that there is a problem in the
clip such as the power having been suddenly cut
off while it was being recorded. You can repair
problem clips by proceeding as follows.

1

Display the thumbnail display screen.



Select the clip to be repaired.



Press [MENU/MODE CHK].



Using , and , select “OPERATION”

– “REPAIR CLIP”, and press .

5

Select “YES”, and press .

It is not possible to repair clips with some types
of damage. These kinds of clips are identified by
the red

X

.

Connecting incomplete clips

In some cases, clips recorded on a multiple
number of P2 cards may not be recognized as
a single continuous clip and may be recognized
as an incomplete clip (

!

indicator) instead. At

times like this you can use the connecting function
to restore the “incomplete” clip to a continuous
(originally connected) clip.

1

Display the thumbnail display screen.



Select the incomplete clip to be connected.



Press [MENU/MODE CHK].



Using , and , select “OPERATION”

– “RE-CONNECTION”, and press .

5

Select “YES”, and press .

A clip is recognized as incomplete when:

A clip recorded on a multiple number of P2 cards
has been copied separately from one card and
then from another or other cards.
A clip recorded on a multiple number of cards
has first been copied separately from one card
and then from another or other cards onto a hard
drive and then written back onto the P2 cards.
A long clip lasting more than 5 minutes in the
AVC-Intra100 or DVCPRO HD format (10 or
so minutes in the AVC-Intra50 or DVCPRO50
format, or 20 or so minutes in the DVCPRO or
DV format) has first been copied to a hard drive
and then written back onto the P2 cards.

Normally, thumbnails with the incomplete clip
indicator are displayed side by side.
If only parts of incomplete clips separated into 3
or more have been connected, the incomplete
clip indicators will remain on the screen until
all the clips which make up the original clip are
connected.

Advertising
This manual is related to the following products: