Panasonic AG-HPG20P - Manual (Page 62)

6
You can connect an external monitor to the output connector of the unit, output clips to the external monitor
and play them back on the monitor.
AG-HPG20
OUTPUT INPUT
CH 1
CH 2
AUDIO
VIDEO HD/SD-SDI HD/SD-SDI
DVCPRO/DV
AUDIO OUT CH1/
CH2 connectors
VIDEO OUT connector
HD/SD-SDI
OUT connector
HD/SD-SDI output
Video output/audio output
This unit
External monitor
Setting the outputs
1
Hold down [POWER] for at least 1 second to turn the power on.

Press [THUMBNAIL/MODE].
The normal display screen appears.

Press [MENU/MODE CHK].

Using and , select “AV OUT SETUP” setting item, and press .
5
Using and , select the setting, and press .
6
Press [MENU/MODE CHK] to end the procedure.
Adjusting the output volume level during recording and playback
The volume level of the sound from the speaker or headphone jack can be adjusted by pressing
during recording or playback.
The volume level of the sound from the speaker or headphone jack can be adjusted by pressing [ALT/3]
and
when the thumbnail display screen is displayed. Refer to AV OUT SETUP screen on page 99.
ALT function must be assigned to [ALT/3] on the setting menu “SW MODE” (Page 97).
Adjusting the output volume level during variable-speed playback
The volume level of the sound from the speaker or headphone jack can be adjusted by pressing [ALT/3]
and
during variable-speed playback. Refer to AV OUT SETUP screen on page 99.
ALT function must be assigned to [ALT/3] on the setting menu “SW MODE” (Page 97).
•
•
Outputting images to an external monitor for playback