Panasonic AG-HPG20P - Manual (Page 63)

Recording
6
Recording data on P cards
You can connect a digital video component equipped with a SDI connector or IEEE 1394 connector, and
record video signals, audio signals or time codes, etc. on the unit.
HD/SD-SDI IN connector
SDI
DVCPRO/DV input/output
connector (IEEE1394)
1394 cable
(optional accessory)
Digital
component
This Unit
1
Hold down [POWER] for at least 1 second to
turn the power on.
The thumbnail screen appears.

Press [THUMBNAIL/MODE].
The normal display screen appears.
106 min 1 2
1 C H 2 C H
3 C H 4 C H
60
AVC-I100

Press [MENU/MODE CHK].

Set the following items.
Setting item Menu
Input signal
“RECORDING SETUP”–
“INPUT SELECT”
Recording format*
“RECORDING SETUP”–
“SYS FORMAT”,
“REC FMT(SD)”,
“REC FMT(HD)”
Time code, user’s bit “TIMECODE SETUP”
* The video format of the input signal and the
recording format on this unit must be the same.
For details, refer to the setting menu
“RECORDING SETUP” (Page 90) and
“TIMECODE SETUP” (Page 93).
5
Press the two [REC] buttons together.
Recording now starts.
To stop the recording, press .
While recording is underway, text memos or
shot marks assigned to [USER] (Page 97)
can be added.
(Continued on the next page)
•
•
Recording
Playback