PoGo Products T1 - Manual (Page 32)

31
2. Playing your TiVo® files
2.1 Connect to External AV Device
2.1.1 Connect Video Cable
You must connect MEDIAGATE T1 to an AV device (such as a TV set) in order to transfer your TiVo® files.
MEDIAGATE T1 supports Composite, S-video, and Component video connections. Use the video connection that your
TV supports. Normally, your TV supports a composite video connection; a composite video cable is included in this
package.
Red
(Pr)
Blue
(Pb)
Green
(Y)
Red
(Pr)
Blue
(Pb)
Green
(Y)
Connect Pr Jack of TV
Connect Pb Jack of TV
Connect Y Jack of TV
Yellow
(CVBS)
Yellow
(CVBS)
S-VIDEO
Connect to Composite
(CVBS) Jack of TV
Connect S-Video
Jack of TV
?áComposite: Yellow RCA cable. (Supplied)
?áS-Video: Black rounded cable (not supplied)
?áComponent: Y, Pb, Pr component cable (not supplied)
ü If a normal screen is not visible after connecting video cable, please check the following:
1. “TV “– Switch to Video Input Mode: Turn on TV and switch to video input mode, same as video connection. See TV users
manual for more info.
2. “MEDIAGATE T1” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever [VIDEO] is pressed, the
video output signal is changed.
3. After you see a normal screen, you must save video configurations of MEDIAGATE T1. See “1.2.1 Video Setup”.