Pelco Dx8000 - Manual (Page 32)

32 C623M-C (3/05)
CONFIGURING THE LANGUAGE SETTING OF THE DX8000
You must have Administrator or Power User access to configure the language setting of the DX8000.
1. Start the DX8000 if it is not already running, and then log in as a Power User or Administrator.
2. Click .
3. Click . The System page is displayed.
4. Select the appropriate language from the drop-down box.
5. Click Apply.
Figure 26. System Page: Selecting the Language
NOTE: This feature is unavailable in the current software release. It will be available in future releases.
ᕥ
ᕢ
ᕤ
ᕣ