Panasonic SC-HT744 - Manual (Page 8)

R
Q
T
8720
8
Simple
Se
tu
p
∫ Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should
be capable of supporting over 10 kg (22 lbs) per screw. Consult a
qualified building contractor when attaching the speakers to a
wall. Improper attachment may result in damage to the wall and
speakers.
≥ When mounting the front speakers or surround speakers to a wall,
we recommend using a string (not included) to prevent it from falling.
1 Attach the cover plate to the front speaker or surround speaker.
2 Drive a screw (not included) into the wall.
3 Fit the speaker securely onto the screw(s) with the hole(s).
Reattaching the speaker cable to the stand
1 Remove the eight screws from the stand, and remove the speaker net.
2 Position the cable.
3 Attach the speaker net with the screws.
∫ Fitting speaker stands
(not included)
(Except front and surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥ The stands must be able to support over 10 kg (22 lbs).
≥ The stands must be stable even if the speakers are in a high
position.
Speaker installation options
Preparation for front speakers and surround speakers
1
Remove the speaker cable from the stand.
2 Connect the cable ( ➜ page 7).
4 Cover plates 4 Screws
Release the cable
from the groove.
1
2
Screw
Tighten securely.
Cover plate
‰7.5 to 9.5 mm
(
19 / 64
q to 3 / 8
q)
5.0 to 7.0 mm ( 3 / 16
q to 9 / 32
q) Wall or pillar
‰4.0 mm ( 5 / 32
q)
106 mm
(4
3 / 16
z)
200 mm
(7
7 / 8
z)
Center speaker
340 mm
(13
3 / 8
z)
Front and surround speakers
In this position, the
speaker will likely
fall if moved to the
left or right. Move the speaker
so that the screw
is in this position.
e.g.
Screw
Press the cable
into the groove.
Approx.15 cm (5 29 / 32
z)
Cable
Speaker stand
(not included)
Plate thickness plus 7 mm
to 10 mm (plus 9 / 32
q to 13 / 32
q)
e.g. Center speaker
5 mm ( 3 / 16
q), pitch 0.8 mm ( 1 / 32
q)
Metal screw holes
For attaching to
speaker stands
60 mm (2 3 / 8
q)
As
sem
b
ling
the
fr
ont
and
surr
ound
spe
ake
rs
8720En_p06-15.fm Page 8 Friday, March 24, 2006 4:29 PM