Panasonic BL-C10A User Manual
Page 27
Operating Instructions
[For assistance, please call: 1-800-272-7033] 27
Basic
(1)
Network
Configures the network settings such as connection mode
to connect the camera to the network (see page 28).
(2)
UPnP
Enables automatic port forwarding or shortcut to the
camera (see page 32).
(3)
Viewnetcam.
com
Registers with the Viewnetcam.com service (see page 33).
(4)
Date and Time
Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page 35).
(5)
Camera
Sets camera name, white balance, AC power source
frequency and pan/tilt range (see page 37).
Account
(6)
Administrator
*1
*1
If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [Multi-
Camera Setup page] settings, changes will not be applied to the video (Motion JPEG)
viewers. Restart the camera to make changes applied to all video viewers.
Sets authentication setting and administrator security (user
name and password) (see page 41).
(7)
General User
*1
Sets general user security (user name and password) and
general user's feature restriction (see page 45).
Advanced
(8)
Image Display
Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, limit continuous motion
JPEG
*1
, and language (see page 47).
(9)
Multi-Camera
*1
Sets the camera IP address or host name, camera name on
the Multi-Camera page (maximum 12 cameras) (see page
49).
(10)
Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page
(11)
Operation Time Sets time period to display camera images (see page 67).
(12)
Indicator
Control
Sets indicator display (see page 69).
(13)
Privacy Mode
Enables privacy mode (see page 70).