Enjoying stereo audio in video calls, Showing content, Showing content from a computer – Polycom 9.0.6 User Manual
Page 20
 
Getting Started Guide for the VSX Series
16
© Polycom, Inc.
To unmute your main speakers:
Press
Snap on the remote control.
The sound from the main speakers is restored to the previous level.
Enjoying Stereo Audio in Video Calls
If your video conferencing room is configured to use stereo sound, the left and 
right microphone inputs are configured during system setup. It is important 
that you do not move the microphones as this may detract from the stereo 
audio experience.
Showing Content
You may be able to show the following to the far sites:
• Any information stored on a computer
• A paper document or object placed on a document camera
• A videotape or DVD
You can share one type of content and one video source at a time, and you can 
switch to a different type of content or video source if you need to. Participants 
at other sites can also share content or video sources.
Showing Content from a Computer
If you have a VSX set-top system with a Visual Concert™ VSX connected to it, 
or a VSX component system with an ImageShare™ II connected to it, you can 
attach a computer and show content that is on the computer.
If you have the Polycom People+Content™ IP software application installed 
on your computer, you can show content from any Windows XP or 
Windows 2000 computer that is connected to the network. 
Stereo audio is only used in video calls of 256 kbps or higher.
To keep the call secure, content is automatically stopped when a site is added to 
the call.