Palsonic 3400 - Manual (Page 8)

4. REMOTE CONTROL OPERATION:
REMOTE CONTROL UNIT
: STANDBY
1 ~ 9 : DIGITAL CHANNEL SELECTOR
10/0 : CHANNEL 10 OR CHANNEL 0 SELECTOR
SYSTEM : COLOUR SYSTEM CONTROL
-/- - : DIGIT OR TWO DIGIT CHANNEL
SELECT
: PREVIOUS
4.1 INSTALLING BATTERIES:
4.1.1 Remove the battery cover of Remote Control Unit.
4.1.2 Insert two "AAA", 1.5V batteries, making sure the polarity ( + or - ) of the batteries
matches the polarity marks inside the unit.
4.1.3 Close the battery cover
NOTE: * When the Remote Control Unit is not used for a long time or the batteries are worn out,
take out the batteries to prevent electrolyte leakage.
* Take care not to drop, dampen, dissemble the Remote Control Unit.
4.2 STANDBY BUTTON
Refer to 3.1.
CH : CHANNEL SELECTOR
VOL : VOLUME CONTROL
PPS : PERSONAL PREFERENCE SELECT
(BRIGHTNESS, COLOUR)
: PICTURE/TIME ADJUSTMENT
PICTURE : PICTURE CONTROL
DSP : DISPLAY
6