Use philips easylink, One-touch play 1, One-touch standby 1 – Philips BDP2500 User Manual
Page 20
20
EN
4
Press to select a language, then press OK.
Use Philips EasyLink
This product supports Philips EasyLink which uses the HDMI CEC
(Consumer Electronics Control) protocol. You can use one single remote
control to control EasyLink-compliant devices that are connected through
HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the HDMI CEC operations on the
•
TV and on other devices connected to TV. Refer to the TVs/devices manual for details.
One-touch play
1
Press
the
STANDBY button to turn on this product.
The TV (if supports one-touch play) automatically turns on and
»
switches to the correct video-in channel.
If a disc is loaded in this product, disc play automatically starts.
»
One-touch standby
1
Press and hold the STANDBY button on the remote control for
more than 3 seconds.
All the connected devices (if the device supports one-touch
»
standby) automatically switch to standby.
Note
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
•