Vl1400, Wireless tv link, Philips accessories & recordable media – Philips SBC VL1400 User Manual

Page 2: General product information, Wireless audio/video performance, Rf a/v system information, Rf control system information, Features, Transmitter unit, Receiver unit

Advertising
background image

Links Pay-TV,VCR, DVD and Satellite receiver to your second TV!
The Philips SBC VL1400 Wireless TV Link lets you watch, control and enjoy A/V
content on both your main TV and a second TV located anywhere else in your
house. There’s no need to buy or rent duplicate A/V equipment, and two people
can watch and enjoy two different things.

No more cable laying or hole drilling!
Because the SBC VL1400 uses a wireless RF link, there's no drilling holes or
running cables upstairs to be able to watch your video devices on other locations
in your home.

4 video source inputs
The Wireless TV Link has four separate inputs, each with its own SCART
connector, to allow you to connect up to four A/V source devices at the same
time. It works as a switchbox for both your main and second TV.

Six-in-one universal remote control
There’s no need to walk to the receiver either, because a six-in-one universal
remote control is supplied to make it possible to operate the transmitter and
receiver, and up to five video sources from the second TV. And it works with every
brand of A/V equipment too. When you switch on the receiver and select an input
source, the transmitter is automatically switched on

Wireless RF system
By transmitting crystal clear pictures and stereo sound through walls and ceilings
to your second TV, it extends your possibilities for viewing movies, sports events,
live performances and an incredibly wide range of TV channels anywhere in your
home. The range is up to 30 meters indoors. A multiple-position slide-switch
allows different transmission frequencies to be selected to avoid interference from
other RF devices.

Plug & Play installation for all A/V brands
Install any brand of TV, VCR, DVD, satellite receiver, Pay-TV decoder or any other
device with a SCART connector in minutes.

No need to swap SCART cables
The SCART switchbox functionality means that all your video devices are
available for both your main and secondary TV at all times. This makes it easy to
switch between your DVD player, satellite receiver, VCR and set-top box without
reconfiguring your entire home cinema set-up.

Helpdesk available
Should you have any questions, comments or recommendations
about the Wireless TV Link, please call our helpdesk.

Philips Accessories & Recordable Media

Data subject to change without notice
©2002 Royal Philips Electronics
All rights reserved

http://www.philips.com

Helpdesk available

SBC

VL1400

Wireless TV Link

General product information

Power supply

12V DC via 220-240 VAC/ 50 Hz adapter

Power consumption

7 Watts

Operating / storage temperature

5 to 45ºC / -25 to 55ºC

Plug and Play system

via SCART connectors

Number of A/V source inputs

4

Audio L/R out transmitter

yes (RCA)

SCART switchbox (RGB enabled)

yes (can be overruled manually)

Universal Remote Control

included: 6 in 1 (LINK,TV,VCR, DVD,
SAT, CBL)

Wireless Audio/Video performance

Supported video standards

CVBS: PAL/NTSC/SECAM

Video output

1Vpp into 75ohm

Signal noise

47dB ± 6dB

Audio format

Stereo (L + R)

Freq. Range

70 Hz – 20kHz (± 3dB)

Signal Noise

58dB ± 7dB

Crosstalk (1kHz)

45dB, min.

Distortion (1kHz)

2%, max.

RF A/V system information

Typical range

up to 100 m in open air, up to 30 m indoors

Carrier frequency

2.4 GHz / FM mod.

Transmission power

<10 mW

Multiple RF channels

4* to allow interference-free operation

Antenna built-in

* May vary per country according to local regulations

RF Control system information

IR carrier freq. Range

32-57kHz (universal remote control extender)

RF carrier frequency

433.92 MHz / AM mod.

RF transmission power

<10 mW

Antenna external

Features

Remote switching

yes

Automatic power on/off transmitter

yes

• Wireless Link RC operatable

yes

• Easylink compatible

yes

• Auto format switching

yes (on transmitter)

• Link A/V input sources

yes

to CVR/DVD+RW

Transmitter unit

Dimensions (w x h x d)

270 x 61 x 150 mm

Power standby/on switch

on the front

View source on transmitter switch

on the front

Indication selected input

7 segment LED display

on transmitter

Link input source to input 4

on the front

(VCR / DVD+RW)

Indication link source

LEDs

SCART Input

3 SCART (RBG / CVBS + audio L/R)

SCART In/Output

In: as SCART input, Out:CVBS + audio L/R

SCART Output

1 SCART (RBG / CVBS + audio L/R)

Audio out

RCA L/R

Receiver unit

Dimensions (w x h x d)

61 x 146 x 150 mm

View source on receiver switches (+/-) on the front

Power standby/on switch

on the front

SCART output

1 SCART CVBS + audio L/R

Capture range of IR receiver

up to 7 meters max.

Packaging contents

• 1 transmitter unit
• 1 receiver unit
• 1 Universal Remote Control
• 2 SCART cables
• 2 power supply adapters
• 1 RC extender cord (4 IR LEDs)
• 1 Instructions for use booklet

Advertising