Maintenance and lubrication, Recoil housing – Polaris Scrambler 500 4x4 User Manual

Page 96

Advertising
background image

93

MAINTENANCE AND LUBRICATION

Recoil Housing

To prevent possible engine damage,

always drain the recoil housing (1)

after operating the ATV in very wet

conditions. This should also be

done before storing the ATV.
Water will enter the recoil housing

if the starter handle is disengaged

from the rope guide when under

water.
The drain screw is located at the

bottom of the recoil housing. Use a

wrench to remove the screw. Be sure to reinstall the screw after

draining the housing.

NOTE: Do not open the crankcase drain unless the engine has

ingested water. On 4-cycle engines, some engine oil will be

lost if the crankcase drain is opened.

1

Advertising