Panasonic KX-TG6431 - Manual (Page 5)

For assistance, please visit http://www.panasonic.com/help 5
2 Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L If an error tone sounds, or if _ is still displayed, register the handset
according to the base unit’s operating instructions.
Display language
1 { MENU} (center of joystick) i {#}{1}{1}{0}
2 {V} /{^}: Select the desired setting.
3 Press down the center of the joystick to save. i {OFF}
Belt clip
Wall mounting
1 Drive the screws (not supplied) into the wall.
2 Mount the charger ( A), then slide it down (B) and to the right (C)
until it is secure.
N To attach N To remove
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TGA740(e).fm Page 5 Tuesday, November 18, 2008 5:34 PM