Card functions screen, User file screen, Meta data screen – Panasonic AG-HMC150 User Manual
Page 16: Setup menu list (continued) card functions screen
96
Setup menu list (continued)
CARD FUNCTIONS screen
Item
Display
mode
Description of settings
CARD
FORMAT
(Camera)
(PB)
Formats the SD Memory Card.
YES:
Formats the card.
NO:
Returns to the last screen.
CARD STATUS (Camera)
(PB)
Displays the SD Memory Card status.
YES:
Displays the card status.
NO:
Returns to the last screen.
CLIP
PROPERTY
(PB)
Displays information about the selected clip.
YES:
Displays clip information.
NO:
Returns to the last screen.
USER FILE screen
Item
Display
mode
Description of settings
CARD READ/
WRITE
(Camera)
(PB)
You can save four user file settings to the SD Memory Card, and can also title the
saved files.
READ: Read
WRITE: Write
NO:
Returns to the last screen.
LOAD/SAVE/
INIT
(Camera)
(PB)
LOAD: Loads the settings in a previously stored user file.
SAVE: Saves the updated user file settings.
INITIALIZE: Returns the user settings in the user file to the factory settings.
NO:
Returns to the last screen.
After a LOAD or INITIALIZE operation, turn the POWER switch off and then
back on again to make the new settings available.
The INITIALIZE operations do not change the TIME ZONE settings. (Page 99)
•
•
META DATA screen
Item
Display
mode
Description of settings
CARD READ
(Camera)
Loads the metadata recorded on the SD Memory Card into the unit.
YES NO
“NO FILE” is displayed when no metadata is recorded in the SD Memory Card.
•
RECORD
(Camera)
Sets whether to record the metadata to be loaded into the unit simultaneously on
a SD Memory Card.
ON:
Records simultaneously.
OFF:
Does not record simultaneously.
USER CLIP
NAME
(Camera)
Selects the method of USER CLIP NAME recording.
TYPE1: User clip name is the same as the CLIP NAME if there is no uploaded
metadata or data.
TYPE2: User clip name is the same as the CLIP NAME if no combination of data
and COUNT value is uploaded, or if there is no uploaded data.
CLIP COUNT
RESET
(Camera)
Resets the COUNT value to 1.
YES NO
META DATA
PROP
(Camera)
Displays the metadata which has been recorded in the unit.
YES NO
indicates the factory setting.