Philips BDP3008 - Manual (Page 20)

21
Specifi cations
Note
Specifi cation and design are subject to change without •
notice
Play media
BD-Video, DVD-Video, DVD+R/+RW, DVD-R/-
RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD,
Video CD/SVCD, Picture CD, MP3-CD, WMA-CD,
DivX (Ultra)-CD.
Accessories supplied
Remote control and batteries •
Audio/Video cables •
Power cable •
Quick start guide •
User manual •
Video
Signal system: PAL / NTSC •
Composite video output: 1 Vp-p (75 ohm) •
Component video output: 480/576i, 480/576p, •
720p, 1080i
Y: 1 Vp-p (75 ohm) •
Pb: 0.7 V-pp (75 ohm) •
Pr: 0.7 V-pp (75 ohm) •
HDMI output 480p, 576p, 720p, 1080i, 1080p,
•
1080p24
Audio
2 Channel analog output •
Audio Front L&R : 2 Vrms (> 1 kohm) •
Digital output: 0.5 Vp-p (75 ohm)
•
Coaxial •
HDMI output
•
Sampling frequency: •
MP3: 32 kHz, 44.1 kHz, 48 kHz •
WMA: 44.1 kHz, 48 kHz •
Constant bit rate:
•
MP3: 112 kbps - 320 kpbs •
WMA: 48 kpbs - 192 kpbs •
USB
As additional memory for software updates •
and BD-Live bonus contents. Not for media
play.
Main unit
Power supply rating •
Europe: 220~240V ~AC, ~50 Hz •
Russia: 220~230V ~AC, ~50 Hz •
Asia Pacifi c: 110~240V ~AC, 50~60 Hz •
Latin America: 110~240V ~AC, 50~60 Hz •
China: 110~240V ~AC, ~50 Hz •
Update software via network
1 Set up the network connection (see “Get
started’ > “Set up network”).
2
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
You are prompted to start upgrading
»
processs if upgrade media is detected.
3 Follow the instructions on the TV screen to
confi rm update operation.
Once software update is complete, this
»
product automatically turns off to standby.
4 Disconnect the power cord for a few seconds
and connect again to turn on this product.
Update software via USB
1 Go to www.philips.com/support to check if
the latest software version is available for this
product.
2 Download the software onto a USB fl ash
drive.
3 Insert the USB fl ash drive to the USB jack of
the rear panel.
4 In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
5
Follow the instructions on the TV screen to
confi rm update operation.
Once software update is complete, this
»
product automatically turns off to standby.
6
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Note
Do not turn off the power or remove the USB fl ash •
drive when software updating is in progress to prevent
possible damage of this product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners •
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fi bre cleaning cloth from
the centre to the edge in a straight line movement.
English
EN