Panasonic AG-1350P - Manual (Page 30)

30
Erased
Program 2 Program 1 Program 3
New program
Within 10 minutes
Program 1 Program 2 Program 3
Erased
New program
Within 10 minutes
Program 1 Program 2 Program 3
Not erased
New program
10 minutes or more
To Check the Recorded
Programming Data
(Time Stamp Function)
When playback starts after searching with Jet
Navigator function or index search function,
recorded programming data (called Time
Stamp) appears on the TV screen for approx.
5 seconds.
Preparations
≥
Display the VCR picture on the TV.
≥ Be sure to set OSD to ON. (See page 15.)
≥ Press VCR/TV to select the VCR mode.
To Demonstrate the Jet
Navigator Function
Keep NAVI pressed for more than 5 seconds
without inserting a cassette tape.
When Recording Over the Same Location
on a Tape:
≥
The originally recorded program is deleted
from the list.
≥ Program contents starting near the start and
end of the newly recorded program (within
10 minutes before the start and after the end
of the newly recorded program) are also
erased.
(Although old program contents are also
similarly erased in the case of ordinary
recording, the newly recorded program is not
registered in the list.)
CH 2 10/27. TH ON 20:02
Note:
≥
Time Stamp does not appear if the beginning
of the Jet Navigator data are not recorded
10 minutes before and after the current tape
position even when index signals are
recorded.
On Screen Display