Philips HTS2500/55 - Manual (Page 12)

10
6 Change settings
This section helps you to change the settings of
your home theater.
Caution
Most of the settings are already conÀ gured •
with the best value for the home theater.
Unless you have a speciÀ c reason to change a
setting, it is best to leave it at the default value.
Access the setup menu
1
Press SETUP .
The following menu appears.
»
Symbol Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
3
Press BACK to return to the previous
menu, or press SETUP to exit.
Note
You cannot change a setting that is grayed out. •
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
1
Press RADIO .
2
Press .
3
Press and hold until ‘GRID 9’ (50 kHz)
or ‘GRID 10’ (100 kHz) is displayed.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device .
EN
1_HTS2500_55_EN2.indd Sec1:10 7/8/2010 9:44:52 AM