ParaBody 250101 - Manual (Page 12)

12
FIGURE 11
• Attach two 4 X 7” ROLLER PADS (15) to the FRONT UPRIGHT (2) using one 3/4 X 16” TUBE (14) and two 3/4” STARLOCK
COLLARS (52) as shown in FIGURE 11.
STEP 11
• Attach two 4 X 7” ROLLER PADS (15) to the PRESS SEAT (4) using one 3/4 X 16” TUBE (14) and two 3/4” STARLOCK
COLLARS (52) as shown in FIGURE 11.
• Attach two 4 X 7” ROLLER PADS (15) to the LEG CURL EXT (1) using one 3/4 X 16” TUBE (14) and two 3/4” STARLOCK
COLLARS (52) as shown in FIGURE 11.
FIGURE 12
STEP 12
• Securely assemble one 4-1/2” PULLEY (18) to the FLOATING PULLEY
BRACKET (6) using one 3/8 X 1-3/4” BOLT (49) and one 3/8” LOCK NUT
(41) as shown in FIGURE 12.
52
2
14
15
4
1
6
18
41
49 3/8 X 1-3/4”