Polycom IP 7000 - Manual (Page 12)

Integration Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System in Unsupported VoIP Environments
6
2. Connect one end of the Polycom HDX Microphone Cable into an
available microphone connector on the phone.
The following figure shows how to connect the Polycom HDX
Microphone Cable to an available microphone connector on the phone.
The other end of the cable connects to the Polycom HDX system.
3. Attach the Polycom HDX Microphone Cable to the Polycom HDX
system. For information on where the microphone connector is located on
the system, refer to the “Optional setup” instructions in the setup guide
for your system at http://www.polycom.com/videodocumentation .
Note The Polycom HDX 9000 systems require an adapter to plug in the Polycom HDX
Microphone Cable. The adapters are shipped with the cables for the Polycom HDX
9000 systems only.
Network Cable
Polycom
HDX System
To Network