Panasonic KX-PW10CL2 - Manual (Page 4)

Number Display Service Functions
3 Sending a fax with
(search dial)
Calling with (search dial) 4
2.
Note:
You can also call using the following procedure.
1. Lift the handset, or press (speakerphone).
- Dial 184 or 186, if required.
2. Press (received call memory).
3. Rotate (search dial) until the number you
want to dial is displayed.
4. Press (start/copy) while a long beep is
heard.
- If you dialed 184 or 186, press
(start/copy) when 3 beeps are heard.
Note:
If the line is busy, the unit will automatically redial
the number up to three times at one minute
intervals.
(Automatic Redialing)
If you want to dial 184 or 186 to send a fax, proceed
as follows.
1. Insert the document, and then lift the handset.
2. Dial 184 or 186.
3. Press (received call memory).
4. Rotate (search dial) until the number you
want to dial is displayed.
5. Press (start/copy) when 3 beeps are heard.
6. Press (start/copy) again.
1. Press (received call memory).
Rotate (search dial) until the number you
want to dial is displayed.
Up to 14 digits can be displayed.
2. Insert the document (a beep will be heard), and
then select the resolution by pressing
(resolution).
Insert the document FACE DOWN.
Insert up to 5 sheets at a time.
3. Lift the handset, or press (speakerphone).
You can also dial by pressing (start/copy).
(If a document is inserted, the unit will send a
fax.)
5. Press (start/copy).
After the message is displayed, the unit will start to
send the fax.
4. Rotate (search dial) until the number you
want to dial is displayed.
4. Talk to the other party.
1. Open the document tray and adjust the guides.
3. Press (received call memory).
5. When finished, replace the handset, or press
(speakerphone).
Handset
STANDARD
FINE
HALF TONE
Document Tray
Handset
Adjust the
guides.
4