Philips SRU 5086 - Manual (Page 4)

Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Adjusting device selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Assign Volume control to another mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Restoring the original remote control settings . . . . . . . . . . . . . . . . . 10-11
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 72-96
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
1. Introduction
Congratulations on your purchase of the Philips SRU 5060 universal remote
control. After installing the remote control you can operate a maximum of
6 different devices with it:TV, DVD player/recorder, video recorder,
amplifier/receiver, CD player and STB (settop box, satellite or cable decoder).
You can find information about how to prepare this remote control for use in
the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards and slide it in the
direction of the arrow.
2
Place two AAA type batteries into the battery
compartment, as shown.
3
Slide the cover back and click it firmly into place.
Note: If the device indicators in the selector window
(DVD, STB, VCR, CD and AMP) and the Standby key blink four times after
every key press, the remote control is indicating that its batteries are
running low. Replace the old batteries with two new AAA batteries.
Testing the remote control
The remote control has been programmed to operate most Philips devices.
Because the SRU 5060 may use different signals for each brand and even for
different models of the same brand, it is advisable to test whether your
device responds to the SRU 5060.The example below (TV) instructs you
how to do this.You can repeat the same steps for other devices (DVD, video
recorder, etc.) which you want to operate using the SRU 5060.
Example of TV:
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
2
Press the SELECT key to select TV.
Press the key until the Standby key lights up.
If the key does not light up, check whether the
batteries are properly inserted
(see ‘Inserting the batteries’).
4
Instructions for use
English