Panasonic SC-BT100 - Manual (Page 26)

26
RQT9129
Changing audio quality/sound field
≥The following sound effects may not be available or have no effect with some sources, or when headphones are used (> 14).
≥You may experience a reduction in sound quality when these sound effects are used with some sources. If this occurs, turn the sound effects off.
Main unit only
You can enhance the subwoofer effect with strong bass.
Press [SW BOOST] on the main unit.
≥The SW BOOST indicator lights when Subwoofer Boost is turned on.
1 Press [SOUND] .
2 Press [ 3, 4] and select item for setting.
EQ """"""") H.BASS """""""") REAL CF
f v
W. S. ("""""" SRD ENH(""""""" SW. LEVEL
3 Press [OK].
You can select sound quality settings.
4 Press [ 3, 4] to select the item.
Each time you press the button:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
You can enhance low-frequency sound so that heavy bass sound can
be heard clearly.
4 Press [ 3, 4] to select “ON” or “OFF”.
You can make the sound of the center speaker seem like it is coming
from within the TV.
4 Press [ 3, 4] to select “ON” or “OFF”.
≥This function is effective when playing audio containing center
channel sound or when Dolby Pro Logic IIx/Dolby Pro Logic II or
DTS NEO:6 is on.
You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playback source.
4 Press [ 3, 4] to select the item.
SUB W 1: Weakest effect
SUB W 2: Middle effect
SUB W 3: Strongest effect
This function automatically makes speaker adjustment to enhance the
surround sound effect.
4 Press [ 3, 4] to select “ON” or “OFF”.
≥This function is effective when playing audio containing surround
channel sound or when Dolby Pro Logic IIx/Dolby Pro Logic II or
DTS NEO:6 is on.
≥This sound effect have no effect when receiving AM radio broadcast.
You can enhance the surround effect for low volume 5.1-channel
sound. (Convenient for late night viewing.)
4 Press [ 3, 4] to select “ON” or “OFF”.
≥This function is effective when playing audio containing surround
channel sound or when Dolby Pro Logic IIx/Dolby Pro Logic II or
DTS NEO:6 is on.
≥This sound effect have no effect when receiving AM radio broadcast.
1 Press [CH SELECT] to select the speaker.
Each time you press the button:
L R
—) C_) RS_) RB_) LB_) LS_) SW
^"""""""""""""""""""""""""""""b
L R: Front speaker (left and right)
C: Center speaker
RS: Surround speaker (right)
RB: Surround back speaker (right)
LB: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥Speakers with settings (> 34) set to “ ” will not be displayed.
≥The channels not included in the playing audio will not be
displayed (Subwoofer is displayed even if not included).
(When “L R” selected)
2 Press [ 2, 1] to adjust the balance of the front
speakers.
(When other option selected)
2 Press [ 3] (increase) or [4] (decrease) to adjust
the speaker level for each speaker.
C, SW: r6 dB to s6 dB
RS, RB, LB, LS: r10 dB to s10 dB
Using Subwoofer boost
Setting the sound effects
Equalizer (EQ)
Enhancing the bass sound (H.BASS)
Real Center Focus (REAL CF)
Adjusting the subwoofer level (SW. LEVEL)
Surround Enhancer (SRD ENH)
Using Whisper-mode Surround (W. S.)
Adjusting speaker level during play
Adjusting the balance of the front speakers
Adjusting the speaker level
W4S
W2S
96/24
D+
NEO:6
PL x HD
Standard balance
e.g.,
Front right: s11 to s12 dB
e.g., Subwoofer
SC-BT100P-ENG.book 26 ページ ２００８年２月２０日 水曜日 午後６時２２分