Pioneer DV-S969AVi - Manual (Page 17)

Connecting up 02
17
En
Using other types of video
output
This player has standard (composite), S-video
and component video outputs (the DV-
S969AVi also has a D video connector for
component video), as well as an HDMI
connector (for digital video/audio).The main
difference between them is the quality of the
picture.
S-video delivers a better picture than standard
composite video, while component video
gives better picture quality still. The variety of
outputs also gives you the flexibility of
connecting your particular equipment using
the best connection type available.
HDMI provides highest quality digital video
(and audio) using one simple digital connec-
tion, provided your monitor or display is also
equipped with HDMI. See
Connecting using
HDMI on page 24 for more on this.
Connecting using an S-Video output
You can use the S-Video output instead of the
VIDEO OUT jack to connect this player to
your TV (or other equipment).
• Use an S-Video cable (not supplied) to
connect the S-VIDEO OUTPUT to an S-
Video input on your TV, monitor or AV
receiver.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
• If you connect both S-video jacks, but one
of the connected components is not S1/
S2 compatible, the automatic aspect ratio
switching will not work with either
connected component.
CONTROL
IN OUT
S-VIDEO OUT VIDEO OUT COMPONENT VIDEO OUT
P B P R Y 2 1 2 1
TV
S-VIDEO
INPUT
DV-59AVi.book(KU).fm 17 ページ ２００３年８月２０日 水曜日 午後６時４６分