Panasonic Blu-Ray Disc Home Theater Sound System SC-BTT 190 - Manual (Page 25)

TV & Radio
Reference
Advanced operations
25 VQT3X51
Listening to the Radio
You can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected.
(
> 13)
1
Press [RADIO] to select “FM”.
2
Press and hold [STATUS] to select
“LOWEST” or “CURRENT”.
LOWEST:
To begin auto preset with the lowest
frequency (FM87.9).
CURRENT:
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual
tuning and presetting”.
3
Press and hold [OK].
Release the button when “AUTO” is
displayed.
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
1
Press [RADIO] to select “FM”.
2
Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1]
B [OK].
To select a 2-digit number
e.g., 12: [1]
B [2].
Alternatively, press [ W, X] or [3, 4].
∫ Manual tuning and presetting
Select a radio broadcast.
1 Press [RADIO] to select “FM”.
2 Press [SEARCH
6] or [SEARCH5] to
select the frequency.
≥ To start automatic tuning, press and hold [SEARCH6],
[SEARCH 5] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
3 While listening to the radio broadcast
Press [OK].
4 While “P” is flashing on the display
Press the number buttons to select the channel.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
≥ The radio settings will be shown on the unit's display.
(Some settings are also indicated on the TV screen.)
Presetting stations
automatically
Listening to a preset
channel
SC-BTT190P_eng.book 25 ページ ２０１２年２月２０日 月曜日 午後５時５分