Panasonic Blu-Ray Disc Home Theater Sound System SC-BTT 190 - Manual (Page 38)

38 VQT3X51
Speaker installation
option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
You can attach all of the speakers (except
subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 kg (22 lbs) per screw.
1
Drive a screw (not supplied) into the wall.
A At least 30 mm (1 3 /
16
q)
B ‰ 4.0 mm ( 5 /
32
q)
C ‰ 7.0 mm to ‰ 9.4 mm ( 9 /
32
q to 3 /
8
q)
D Wall or pillar
E 5.5 mm to 7.5 mm (
7 /
32
q to 5 /
16
q)
2
Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below to identify
the screwing positions on the wall.
≥ Leave at least 20 mm (
25 /
32
q) of space above the
speaker and 10 mm ( 13 /
32
q) on each side to
allow enough space for fitting the speaker.
[BTT196] [BTT195]
Front speaker
Attach to a wall without the base and the stand.
A 51 mm (2 q)
B 64 mm (2 17 /
30
q)
C 350 mm (13 25 /
32
q)
[BTT190]
Front speaker, Surround speaker
[BTT196] [BTT195]
Surround speaker
D 40 mm (1 9 /
16
q)
E 24 mm ( 15 /
16
q)
Center speaker
F 18 mm ( 23 /
32
q)
G 25 mm ( 31 /
32
q)
H 230.5 mm (9 1 /
16
q)
Attaching to a wall
e.g., [BTT196] Front speaker
DO NOT DO
≥ In this position, the
speaker will likely
fall if moved to the
left or right.
≥ Move the speaker
so that the screw is
in this position.













SC-BTT190P_eng.book 38 ページ ２０１２年２月２０日 月曜日 午後５時５分