Philips DPC850 - Manual (Page 2)

Connecting headphones (not
included)
● To enjoy your portable DVD player
without disturbing others, you can connect
one or more headphones to the n1 or
(and) n 2 jack on the set.
Connecting an SD/MMC card
1 Insert an SD/MMC card into the
SD/MMC CARD slot with the metal
contact facing down.
2 On the DVD player panel, press the
source key repeatedly (or SD/MMC
CARD on the remote) to select the
SD/MMC source.
3 Play video or audio files stored in the card
by selecting the desired file with 3 4 and
OK.
Connecting additional equipment
(TV for example)
1 Connect the AV OUT socket on the set to
the video and audio sockets on a TV as
shown directly.
2 Switch on the TV and set to the correct
video-in channel.
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
Note:
– When connecting a device to the AV IN socket
on the DVD player, you need to press the source
key repeatedly on the front panel (or AV on the
remote) to select AV IN (AUX).
White
Red
Yellow
White
Red
Yellow
OUT
OUT
AV OUT
AV IN
Headphone
SD/MMC
OR
Printed in China WK652
1
2
3
5
Max.180 0
4
1 Open the lid of the player and adjust the
swivel screen clockwise to your preferred
viewing angle.
2 Slide the POWER switch to ON to
switch on the DVD player.
➜ The POWER indicator turns on.
3 Press OPEN to open the disc door.
4 Remove the protective card (if any) and
load a disc with the label side facing up.
5 Close the disc door. Playback will start
automatically. If not, press 2;.
6 To stop playback, press 9 on the remote
control.
3 Enjoy (Disc operation) 3 Enjoy (Other options)
Note:
– Once the battery is running low (the power
indicator will flash as a prior warning),
immediately recharge it (regardless of whether
you plan to use the battery or not) in order to
maximize the battery life.
DCP750/850 QSG-37.qxd 2007.3.5 14:47 Page 2