Patton electronic 2073 User Manual
Page 3
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at:
tel: (301)975-1007
email: [email protected]
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 2073. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
3
22..00 G
GEEN
NEER
RA
ALL IIN
NFFO
OR
RM
MA
ATTIIO
ON
N
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Bi-directionally converts V.24, X.21,V.35 or 10 BaseT to co-direc-
tional G.703
• LED indicators monitor Test Mode and Synchronization
• Internal, external or network clocking options
• Test Mode controlled by switch or by local DTE (V.24 and V.35
Versions Only)
• Complies with CCITT/ITU G.823 Jitter Control Specifications
• Built-in surge protection and transformer isolation
• Point-to-Point distance up to 5250 ft (1600m) on 24 AWG twisted
pair
• 120 ohm (twisted pair) network termination
2.2 DESCRIPTION
The Patton Model 2073 standalone interface converter/rate
adapter allow a synchronous V.24, V.35, X.21 or ethernet device to
communicate bi-directionally over the G.703 co-directional PCM net-
work. Supporting internal, external DTE timing or G.703 network gen-
erated timing, the Model 2073 is perfect for networking applications
that require speeds of 9600 bps to 64 kbps. The Quick-Connect style
of interchangeable interface modules for the 2073 allow various physi-
cal and electrical interfaces to connect to the 64K synchronous G.703
network.
A 120 ohm twisted pair telephone port provides the interface for
the G.703 network. Additionally, 75 ohm terminations can be made
using the Patton Model 460 (G.703 balun).
Diagnostics include Local Loopback and G.703 Loopback testing.
Synchronous clock jitter is attenuated in accordance with the G.823
specification.
4
NOTE:
Packages received without an RMA number will not be
accepted.