Connecting the system, Piega p sub 4, Loudspeaker terminals on the subwoofer – Piega P Sub 4 User Manual
Page 12: Configuration example for stereo mode
12
PIEGA P SUB 4
Configuration example for stereo mode
Loudspeaker terminals on the subwoofer
Commonly used configuration in stereo mode with the loudspeakers (parallel) connected to the subwoofer. Refer to the appropriate
manual for information about operation and connection options for your stereo amplifier.
Benefit:
Frequently used configuration in stereo mode
>Simple and durable cabling...!
Connection:
>Connect the P SUB 4 subwoofer cable to your stereo
amplifier at the terminal marked SPEAKER (or similar)
>Connect up the loudspeakers parallel to the subwoofer
>For this use suitable loudspeaker cables, if necessary with
banana plugs (not supplied)
Connecting the System
Rear R
Center
Rear L
L
R
Front R
Front L
Speaker L
Speaker R
230V
POWER
ON
OFF
T3. 15AL250V FOR 230V INPUT
T5AL250V FOR 115V INPUT
115/230V - 50/60HZ 500W
HI LEVEL OUTPUT
HI LEVEL INPUT
Amplifier