Parrot Car CD MP3 Player - Manual (Page 12)

FEATURES IN PHONE MODE: hands-free (Bluetooth)
Press Phone to change the system to Phone mode.
Phones compatible with the Bluetooth® technology use either the Hands-free or the Headset
profile for transferring the call to the car stereo. The Hands-free profile offers the most features.
When using your car stereo in Tuner or CD/MP3 mode, the unit automatically switches to Phone
mode if someone calls you. After the call, the car stereo returns to Tuner or CD/MP3 mode. The
driver does not need to take any action. The same applies when you make a call via the car stereo.
Pairing :
Pairing is the first connection between your Bluetooth® phone and the car stereo. This procedure
is initiated via your phone. Search for any Bluetooth® peripherals. Once «Parrot Car Stereo» is
found, select it and your phone prompts you to enter a four-digit code. Enter 1234 and confirm.
After the necessary data has been exchanged, you are now Bluetooth® connected with the car
stereo.
With some phones, a special mode needs to be enabled prior to pairing for access to more features.
Refer to Bluetooth > Settings > Pair a phone.
Synchronising the phone’s phonebook :
With some Bluetooth phones, the phonebook is automatically synchronised in the kit’s memory. If
your phone does not support automatic synchronisation, you can also use the Object Push feature
on your phone to send contacts from your phone to the car stereo by Bluetooth®.
When synchronising the phonebook, the Bluetooth® icon scrolls over the screen.
Refer to your phone’s user guide or our website for details on how to proceed:
«www.parrot.biz, at the section entitled Technical Support, User Guides»
Answering / Hanging up :
To answer a call, press the green button above the scroll wheel. Once you have finished your
conversation, press the red button to hang up.
Discreet mode :
During a call, press the green button to switch the conversation over to the phone. Press the green
button again to return the call to hands-free mode. This feature is only available on phones with a
Hands-free profile.
Caller ID :
When an incoming call is received, the caller’s name or number is displayed. This feature is only
available on certain phones.
Making a call via the car stereo’s interface :
Two options are available:
Change to Phone mode. Dial the phone number directly via the keypad and then press the green
button. To dial a number with «+» as the prefix, quickly press the zero key twice.
You can also use the voice recognition feature (see below).
Voice recognition :
You can make calls using the car stereo’s voice recognition feature. To do so, contacts must be
memorised in the kit’s memory (automatic synchronisation of the phonebook or contacts sent
individually from the phone). You must have first recorded the keywords: home, work, office, and
so on, as well as the magic word «phone».
Once you have recorded the names, keywords and magic word, you can call a contact as
follows :
Say: Phone… (Beep)… Anna… (Beep)… Home… and the car stereo automatically dials Anna’s
home number.
Similarly, if Anna calls you, you will hear «Anna». Press the green button to answer the call. Press
the red button to end the call. The car stereo automatically returns to Tuner, CD/MP3 or Phone
mode.
You can also use the following sequence for using the voice recognition feature, but without
keywords:
Press the green button and the radio or CD is muted. You will hear a beep.
Say the required person’s name after the beep and if necessary, specify house, work or office (if
available).
Note: When recording the keywords and magic word, park your vehicle in a quiet
place with the windows closed and the heater/air conditioner off.
This is necessary to obtain a higher recognition rate.
12