Polaris 9920183 - Manual (Page 151)

148
ADJUSTMENTS
Suspension Settings
Use a flat blade screwdriver (in tool kit) to make damping adjustments.
NOTE: When the adjuster screw is turned clockwise until it stops, the damping is in the
fully closed position.
Rear Shock (Standard and Troy Lee)
Setting Compression Damping Rebound Damping
Softest 20 clicks from closed 24 clicks from closed
Factory 10 clicks from closed 16 clicks from closed
Firmest 2 clicks from closed 2 clicks from closed
Front Shock (Troy Lee)
Setting Compression
Softest 20 clicks from closed
Factory 10 clicks from closed
Firmest 2 clicks from closed