Panasonic CQ-D5501U - Manual (Page 10)

q
Radio Mode
Press [SRC] to select the radio mode.
w Band
Press [BAND].
e
Tuning
[[]: Higher frequency
[]]: Lower frequency
Press and hold [[] or []] for more than 0.5
seconds, then release it. Seeking will start.
Display Change
Press [DISP] to change the display as follows.
19
1
E
N
G
L
I
S
H
CQ-D5501U
18
17
E
N
G
L
I
S
H
CQ-D5501U
Auto Preset Memory (APM)
With this operation, stations with good receiving condi-
tions can be automatically stored in the preset memory.
q Select a band. (
a Previous page)
w Press and hold [BAND] (APM) for more than 2 sec-
onds.
6 stations with first to 6th highest in signal strength will
be preset to each band.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Note:
¡ To stop scanning, press one of the buttons from [1] to
[6].
Manual Preset Memory
With this operation, a station can be manually stored in the
preset memory.
q Select a band and frequency. (
a Previous page)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset number
18
Preset Station Calling
q Select a band. ( a Previous page)
w Press one of the preset buttons from [1] to [6].
Radio
[SRC: Source]
[BAND]
(APM: Auto Preset Memory)
Preset Buttons [1] to [6]
(Preset station)
[]] [[]
(TUNE)
(Stereo) indicator
Band Frequency
Clock Time
Frequency
Display Off
[DISP] (Display)
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections.
Note:
¡ New stations overwrite existing saved stations after these procedures.
Warning
¡To ensure safety, never attempt to preset stations while you are driving.
Preset number