Philips CMQ205 - Manual (Page 4)

5
Overview of the main unit
a INPUT L/R
Connect car audio with RCA cable. •
b OUTPUT L/R
To connect additional amplifier with •
RCA cable for additional speakers.
c INPUT LEVEL
Adjust input level (0.3V to 6V). •
d FILTER MODE
Set frequency filter at LPF (low-pass- •
filter), HPF (high-pass-filter), or OFF
(flat) mode.
e LPF FREQUENCY
Set LPF (low-pass-filter) frequency •
from 80Hz to 180Hz.
f BASS BOOST
Boost frequency for around 50Hz, •
12dB.
g POWER/PROTECTED
Light in green when the amplifier is •
switched on.
Light in red when the amplifier is •
abnormal and protected.
h SPEAKER OUTPUT
Connect to speakers or subwoofers. •
(30A)
2 Your car power
amplifier
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the amplifier, you can enjoy high quality
sound performance with powerful bass and
beats.
What’s in the box
Check and identify the contents of your package:
a Amplifier
b Screw (25mm) x 4
c Fuse x 1
English
EN