ProForm PFEL71032 User Manual
Page 8
8
10. Refer to step 11. Remove the six M4 x 16mm Screws
(122) and the Left and Right Handlebar Covers (109,
110) from the Console (5).
Attach the Book Holder (114) to the Console (5) with
two M4 x 12mm Round Head Screws (18) as shown.
While another person holds the Console (5) in the
position shown, connect the wire harness on the
Console to the Upper Wire Harness (86). Insert the
excess wire harness down into the Upright (2).
Attach the Console (5) to the Upright (2) with four M4
x 12mm Round Head Screws (18).
Be careful to
avoid pinching the wire harnesses.
18
86
Wire
Harness
2
5
114
10
9. Attach the Left Inner Handlebar (63) to the Upright (2)
with four M6 x 16mm Tapered Button Screws (107).
Attach the Right Inner Handlebar (115) in the same
way.
9
63
115
2
107
107
8. Identify the Left Pedal (13). Attach the Left Pedal to
the left Flex Bar (14) with an M10 x 35mm Carriage
Bolt (20), an M10 Washer (99), an M10 Split Washer
(117), and a Pedal Knob (15) as shown. Note: The Left
Pedal can be attached in any of five positions (see
HOW TO ADJUST THE PEDALS on page 10).
Attach the Right Pedal (12) in the same way. Make
sure that both Pedals are in the same position.
8
14
20
15
99
12
117
13
18