Pacific Cycle SUMMERLAND 22-PS245 User Manual
Page 7
NOTE: One support bar has holes for the
slide attachment. The holes should be
positioned toward the front of the swing set.
GLIDER ASSEMBLY
Required
Parts:
Vertical
Poles
x2
(Footrests
attached)
Horizontal Poles x2 (Seats attached)
Glider attachment x1
Pre-Assembled Parts:
• The seats should be attached to the horizontal poles. These must be disassembled to complete the steps below.
• The foot rests should be attached to the vertical poles.
7
©2006 Pacific Cycle, Inc.
Step Illustration
Instructions
Hardware
Reference
1
Secure the glider attachment with the V-
screw and the bolts at the squared portion
of the top bar.
Part Ref. #: PSHW35, PSHW22
2
Attach the two vertical poles to the glider
attachment. Start by removing the
hardware from the lower section of the
glider attachment. Align the vertical bar
with the glider attachment and re-insert the
hardware. Repeat the process for the other
side.
Part Ref. #: PSHW21, PSHW36