Planet Technology 8-Port IP Power Manager IPM-8002 - Manual (Page 12)

2.3 Connecting Digital Outputs
The IP Power Manager provides two digital outputs (NO by default) to which you can
connect indicators or other output devices that are normally open (NO) or normally closed
(NC). The digital output connectors are work as a switch to let you switch the connected
device On or Off. The connectors will not provide power to the connected device. So the
connected device should connect with its power adapter. You can control the digital outputs
remotely through the console or over the LAN.
2.4 Connecting EMD
An environmental monitoring device that is sensors connected to for detecting temperature,
humidity, water level, and so on can be connected to the IP Power Manager with the console
port. The EMD can also be connected to alarms or indicators and controlled through the IP
Power Manager. Connect the EMD to the console port as shown:
- 7 -