Panasonic WV-BF102 - Manual (Page 15)

-13-
5. Connect the cables as described in the previous
section “CONNECTION”.
6. Remove the rubber cap form the camera mounting
screw hole on the camera cover.
7. Mount the camera onto the ceiling/wall by fixing
with the mounting screws.
Note: Before fixing with the screws, confirm the
direction of the camera by checking the posi-
tion of the logo “Panasonic” on the camera
cover.
“Panasonic” logo indicates the front (when
installed on the ceiling)/upper
(when installed on the wall) direction of the
camera.
8. Close the panel cover. Make sure the panel cover
is closed properly and firmly.
9. Attach the rubber cap into the camera mounting
screw hole on the camera cover.