Pioneer AVX-P7650DVD - Manual (Page 55)

3 While the inputted number is dis-
played, move the joystick to ENTER and
click it.
The code number is set, and you can now set
the level.
4 Press any of 18 to select the desired
level.
The parental lock level is set.
! LEVEL 8  Playback of the entire disc is pos-
sible (initial setting)
! LEVEL 7LEVEL 2  Playback of discs for
children and non-adult-oriented discs is
possible
! LEVEL 1  Playback of discs for children
only is possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.
! With some discs, parental lock operates to
skip certain scenes only, after which normal
playback resumes. For details, refer to the
discs instructions.
Changing the level
You can change the set parental lock level.
1 Use the joystick to select PARENTAL in
VISUAL.
2 Press 09 to input the registered code
number.
3 Move the joystick to ENTER and click it.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon
is displayed. Press CLEAR and input the
correct code number.
# If you forget your code number, refer to If you
forget your code number on this page.
4 Press any of 18 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Refer to Changing the level on this page, and
press CLEAR 10 times. The registered code
number is canceled, letting you register a new
one.
Setting for digitaloutput
Set digital output correctly to match the com-
ponents you are using with this unit. There is
no need to change settings if this unit is not
connected for digital output.
! When using this unit with a Pioneer multi-
channel processor (DEQ-P7050), select
DOLBY/LPCM.
Important
Incorrect setting may result in noise and damage
to speakers so be sure to read the manuals of the
connected components.
1 Use the joystick to select DIGTL OUT in
AUDIO.
2 Move the joystick up or down to select
the digital output setting.
! DOLBY/LPCM  The Dolby Digital signal is
output as it is (initial setting)
! LPCM  The Dolby Digital signal is con-
verted to and output as a linear PCM signal
Setting up the DVD player
En
55
Section
11
Setting
up
the
DVD
player