Panasonic DP-1510P - Manual (Page 24)

24
NOTE
INTERRUPT (F1) Key ENERGY-SAVER Key
■
These modes can save power while the copier is not
in use.
Energy Saver Mode
# To enter this mode
Press the ENERGY-SAVER key or the copier will
automatically enter the ENERGY-SAVER Mode after
15 minutes
* from the last copy. The indicator will flash.
$ To cancel this mode and make copies
Press the ENERGY-SAVER key again.
Sleep Mode
# Automatically enters the Sleep Mode after 30
minutes from the last copy. The copier power will
drop and the indicator will light.
$ To make copies, press the ENERGY-SAVER key.
Interrupt Mode
C This mode can interrupt other copy jobs while
making copies.
# Press the INTERRUPT (F1) key, the indicator will
light.
$ Make another copy job using the platen glass.
% Press the INTERRUPT (F1) key again to continue
the original job.
Note: The ADF/i-ADF can not be used with interrupt.
(Use only the Platen)
∗
Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by the
key operator. (See page 31)
Other Features
Modes Power Consumption Warm Up Time
Normal Operation
Energy Saver Mode
Sleep Mode
Approximately 90 Wh
Approximately 38 Wh
Approximately 2.2 Wh
N/A
17 sec. recovery
30 sec. recovery
ENERGY SAVER
INTERRUPT
Energy Saver/Interrupt Mode