2 placing batteries, 3 using the remote control – Philips SL300I User Manual
Page 28
28
ENGLISH
7.2 Placing batteries
•
Use 2 x 1.5 V batteries, type R03, UM4 or AA.
•
Do not mix old and new batteries.
•
Never mix different types of battery (standard, alkaline, etc.).This may reduce the life of
the batteries.
1
Remove battery cover.
Lift tag on back of remote control upwards.
2
Position batteries
Place batteries as shown inside battery compartment.
3
Close battery cover.
7.3 Using the remote control
•
Be sure to place fresh batteries in the remote control before use.
•
Always point the remote control directly at the infrared receiver eye on the front of the
player; making sure there are no obstructions in the path of the infrared beam.
•
The distance between the remote control and the infrared receiver eye should be no
more than 7 metres directly in front of the player and no more than 5 metres at 30
degree angles to either side