Panasonic H1208TY0 - Manual (Page 35)

RQT9359
35
Other
Symptom Checkpoints
Playing
Playback speed is too fast or slow. • You changed the playback speed (➜ page 17).
The order of playing changed after
reloading files that were once imported
to the computer to this unit.
• This occurs because files imported from the computer are placed at
the end in the folder.
There is no sound from the earphones
or it is difficult to hear or noisy.
• Ensure the plug is inserted firmly.
• Wipe the plug clean.
The sound is distorted. There is a
noise at the beginning of sound.
• Please lower the microphone sensitivity (➜ page 14) or keep more
distance from the recording sound source.
No sound from the speaker. • There is no sound when you have connected earphones.
I hear noises. • Move a mobile telephone away from this unit when you use the two in the same area.
Recorded sounds contain noise that
makes it difficult to hear sounds.
• Reduce noise (➜ page 18). Noise is reduced and listening may
become easier.
Others
The power cannot be turned on.
• The batteries may have run out. Replace the batteries with the new ones (➜ page 5).
The power automatically
turns off.
• When you do not operate for more than approx. 15 minutes, the power automatically turns off.
When you slide the OPERATION/HOLD switch to “
OPR
” side, the power is turned on (➜ page 6).
Cannot delete a file or folder. • The file is protected (➜ page 13).
• The folder is already empty.
• “ ” (blinking) is displayed (➜ page12).
This unit is not recognized by
a computer.
• The OS on the computer may not be compliant with this unit (➜ page 31).
• The password has been set (➜ page 21).
• Are the batteries in this unit? If they are not, insert batteries.
• When the voltage of the battery is too low, “ ” is displayed and
the computer cannot recognize this unit (➜ page 33).