Panasonic TQBJ0349 - Manual (Page 36)

36
- ENGLISH
Basic Operation
Basic operations using the remote control
Using the AV MUTE function
If the projector is not used for a certain period of
time during the meeting intermission, for example, a
AV MUTE mode is available that allows the user to
hide images temporarily.
button
Press <AV MUTE> button on the 1 )
remote control or the main unit.
The projected light is blocked by the internal z
shutter.
Press <AV MUTE> button again. 2 )
Projection resumes. z
Note
The power indicator will flash while the AV MUTE function z
is being used.
Capturing an image
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press the <FREEZE> button again to escape.
Switching the input signal
You can use the remote control to switch the signals
that are being input and projected.
button
Press <INPUT SELECT> button on the
remote control or the main unit.
RGB1 Switches to RGB1 input.
RGB2 Switches to RGB2 input.
DVI-D Switches to DVI-D input.
VIDEO/
S-VIDEO
Switches to VIDEO or S-VIDEO input.
If either of the inputs has already
been selected, the input switches to
the other.
NETWORK Switches to NETWORK input.
HDMI Switches to HDMI input.