Panasonic Frame ET-PFD100 - Manual

655
(25-25/32˝)
907
337
(35-23/32˝)
(13-9/32˝)
62
(2-7/16˝)
S P E C F I L E
ET-PFD100
Frame
As of December 2007 < 1 >
Specifications
Dimensions (W x H x D): 655 x 399 x 907 mm (25-25/32˝ x 15-23/32˝ x 35-23/32˝)
Weight: 17.2 kg (37.9 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Illustration shows the ET-PFD100 attached to the projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This frame is to be used exclusively with Panasonic DLP™ projectors. This mount bracket is to be used when stack-
ing two DLP™ projector units.
Parts Horizontal frames . . . . . . . . . . . . . . . . . . . . 2
Upper pipes . . . . . . . . . . . . . . . . . . . . . . . . 3
Lower pipes . . . . . . . . . . . . . . . . . . . . . . . . 3
Upper pipe mount brackets . . . . . . . . . . . . 6
Lower pipe mount brackets . . . . . . . . . . . . 6
Washer-fitted hex bolts (M6 x 12) . . . . . . . 12
Washer-fitted hex bolts (M6 x 50) . . . . . . . . 5 Washer-fitted hex bolts (M6 x 40) . . . . . . . 24
Spring washers (M10) . . . . . . . . . . . . . . . . . 8
Hex bolts (M10 x 140) . . . . . . . . . . . . . . . . . 4
Flat washers (M10) . . . . . . . . . . . . . . . . . . . 8
Hex washers (M10) . . . . . . . . . . . . . . . . . . . 8
Adjustment nuts (M10) . . . . . . . . . . . . . . . . 4
C a u t i o n :
• All work must be done by a qualified technician.
• Make sure that the mounting location has sufficient strength.
• Read the mounting instructions provided with the frame carefully before starting assembly.
• There are restrictions on the usage and installation conditions of the frame. For details, please consult the
salesperson from whom you purchased the frame.
• The legs of the projector also serve as the frame legs.