Panasonic TQBJ0349 - Manual (Page 59)

DISPLAY OPTION menu
ENGLISH -
59
Settings
BACK COLOR
This sets the color for the projection screen when no
signals are being input.
Press ▲▼ to select [BACK COLOR]. 1 )
Press ◄► to switch [BACK COLOR]. 2 )
The setting will change as follows each time z
◄► is pressed.
BLUE BLACK
LOGO2 LOGO1
BLUE
The entire projection area will
appear blue.
BLACK
The entire projection area will
appear black.
LOGO1
The picture registered by the user
will be projected in the projection
area.
LOGO2 The Panasonic logo is projected.
Note
Separate software is required in order to create the z
pictures to use for [LOGO1].
STARTUP LOGO
This sets the startup logo that is projected when the
power is turned on.
Press ▲▼ to select [STARTUP LOGO]. 1 )
Press ◄► to switch [STARTUP LOGO]. 2 )
The setting will change as follows each time z
◄► is pressed.
LOGO2 NONE LOGO1
LOGO2 The Panasonic logo is projected.
NONE No startup logo is projected.
LOGO1
The picture registered by the user
will be projected.
Note
Separate software is required in order to create the z
pictures to use for [LOGO1]. Consult your dealer.
STARTUP LOGO will be displayed for 15 seconds. z
Managing the sub memory list
You can restore the sub memory data when using
signals from the same input source. Sub memory data
contains the setting information of screen and image
adjustments, such as BRIGHTNESS, CONTRAST or
ASPECT.
Registering the current settings
J
to the list
In the normal screen (when the menu 1 )
is not displayed), press ◄► button.
The signal must be registered before creating a z
sub memory data of the signal.
Displays the list of corresponding sub memory z
data to the signal.
Press ▲▼◄► to select the required 2 )
sub memory data.
Press <ENTER> button.
3 )
The [ SIGNAL NAME] screen will be displayed. z
Press <ENTER> button. 4 )
Note
For renaming a registered data, follow the same z
procedure (steps 4 - 5) of “Renaming a registered data”
( Æ page 71).
Displaying the sub memory list
J
and restoring the settings
In the normal screen (when the menu 1 )
is not displayed), press ◄► button.
The [SUB MEMORY LIST] screen will be z
displayed.
Press ▲▼◄► to select the required 2 )
sub memory data, and press <ENTER>
button.
The [REGISTERED SIGNAL STATUS] screen z
will be displayed.
Press <ENTER> button. 3 )
Restores the settings in the data. z
Deleting a sub memory data J
In the normal screen (when the menu 1 )
is not displayed), press ◄► button.
The [SUB MEMORY LIST] screen will be z
displayed.
Press ▲▼◄► to select the required 2 )
sub memory data, and press <ENTER>
button.
The [REGISTERED SIGNAL STATUS] screen z
will be displayed.
Press <DEFAULT> button. 3 )
Displays the [SUB MEMORY LIST] with z
change.
You can return to the previous step by pressing z
<MENU> button.